Whistler WIC-5000 Manuel du propriétaire télécharger pdf (Page 4)

Operation

1. Press the power switch to turn the camera on (refer to Fig-1). The power

indicator will illuminate and the LCD will become viewable.

2. If the image on the LCD is unclear, try adjusting either the brightness,

contrast or mirror controls on the monitor.

The 6 levels of LED brightness can be adjusted by

pressing the LEDs Brightness Control button (refer to Fig-2).

The 8 levels of LCD contrast may be adjusted by

pressing the LCD Contrast Control button.

3. To rotate the orientation of the image displayed on the LCD by 90 degrees,

press the Mirror button. There are four (4) possible image orientations that

you can toggle through by pressing this button.

4. When in use, the tube should easily maneuver itself into position. Do not

apply excessive force (refer to Fig-3).

5. The accessories included with the unit can be used to retrieve small items like

dropped rings, screws or grabbing wires (refer to Fig-4).

The flexible tube can be bent to accommodate exploration in a variety of locations.

Do not immerse the monitor in water. Store in a dry place. Such measures

reduce the risk of electric shock and damage. Only the lens and tube are water resistant

when the unit is fully assembled.

LEDs

Provide Illumination

WIC-5000man.qxp 11/27/2012 2:48 PM Page 4

1 2 3 4 5 6 7 8 9

Pas de commentaire

Whistler WIC-5000 Manuel du propriétaire Page 4